LoadingThe TR45 profile is a quick solution for covering industrial or commercial buildings, and it is recommended for the construction of roofs or façades.
This type of profile ensures a high load resistance, especially to roofs.
Metigla uses S 280 GD steel with minimum 275 g/m2 Zinc coating, offering high resistance to corrosion and a lifespan of over 50 years.
The FONO self-adhesive membrane, with its main characteristics of condensation absorption and rain noise attenuation, can be applied, on request, on the inside of the TR45 profile and benefits from an increased resistance to extreme temperatures.
The main benefits of the FONO membrane are sound absorption, which results in a substantial reduction in rain noise, as well as the absorption and elimination of condensation, formed on the inside of the sheet.
| Composition | PES / PE / synthetic rubber |
| Treatment | adhesive |
| Special feature | water absorption |
| Weight | 95 g/m² |
| < 1 mm |
| Water absorption at 0 ° | min 900 g/m² |
| Foil flammability | A2 - s1, d0 |
| Tear resistance | min 10 N/25 mm |
| Sound absorption | 0.42 Db |
| Heat transfer capacity | 0.038 W/mK |
Red
RAL 3000
Brown Red
RAL 3011
Blue
RAL 5010
Fir Green
RAL 6009
Reseda Green
RAL 6011
Anthracite Grey
RAL 7016
Brown
RAL 8017
Grey White
RAL 9002
Pure White
RAL 9010
White Aluminium
RAL 9006
Aluminium Grey
RAL 9007
Green Metigla
RAL
Cream
RAL 1014
Yellow
RAL 1021
Umbra Grey
RAL 7022
Light Grey
RAL 7035
Wine Red
RAL 3005
Oxide Red
RAL 3009
Chrome Green
RAL 6020
Anthracite Grey
RAL 7016
Anthracite Grey
RAL 7016 PVDF
Copper Brown
RAL 8004
Brown
RAL 8017
Grey Brown
RAL 8019 PVDF
Grey Brown
RAL 8019
Black
RAL 9005 PVDF
Black
RAL 9005
Anthracite Grey
RAL 7016
Brown
RAL 8017
Grey Brown
RAL 8019
Black
RAL 9005
The raw material used by Metigla in the production process is hot galvanized steel (1), with a zinc protection of at least 275 g/m² (2).
The zinc coating is protected through multilayer technology with a passivated coating (3), primary protective coating (4) and paint layer (5).
The top protective layer (5) is available in following versions: Polyester (25 μm gloss or 35 μm Super Mat), PVDF (polyvinylidene fluoride) of 25 μm, PUR (polyurethane) of 55 μm or PUR MAT (mat polyurethane) of 50 μm.
On the bottom side, the paint coating is 10 μm Polyester or Acrylic (6).
External ridge cap
Verge trim
Gutter
Gutter reinforcement
Outside corner trim
Low eaves closure
Please fill in the form below and we will contact you as soon as possible.
info@metigla.be
+32 3.385.92.22