ChargementThe Metigla TC15 corrugated sheet profile is available in two versions: for facade and roof.
The TC15R corrugated sheet profile is applicable for roof cladding, outside or in the eaves area.
The FONO membrane, applied to the inside of the sheet profile, absorbs condensation caused by temperature differences and reduces rain noise on the roof surface.
The TC15F corrugated sheet profile is ideal for cladding the facades of civil or industrial buildings, fences or enclosing the roof in the eaves area.


| Composition | PES / PE / synthetic rubber |
| Treatment | adhesive |
| Special feature | water absorption |
| Weight | 95 g/m² |
| Thickness | < 1 mm |
| Water absorption at 0 ° | min 900 g/m² |
| Foil flammability | A2 - s1, d0 |
| Tear resistance | min 10 N/25 mm |
| Sound absorption | 0.42 Db |
| Heat transfer capacity | 0.038 W/mK |
Nous continuons à élargir la palette de couleurs de Metigla. En raison de la demande croissante et de la popularité des nuances de gris, le Gris Anthracite (RAL 7016) est désormais disponible en version MAT et ausi en version premium PUR NOVA, pour tout produit appartenant aux divisions Metigla Residential et Industrial.
PUR NOVA est disponible en Gris Anthracite (RAL 7016), Gris (RAL 7024), Brun Chocolat (RAL 8017), Brun Gris (RAL 8019) et Noir (RAL 9005) et se distingue par sa qualité de peinture supérieure, l’épaisseur de 55 µm de la couche de peinture, une résistance accrue aux rayures et une protection étendue contre la dépigmentation, étant l’une des finitions les plus durables.

Crème Brillant
RAL 1014

Jaune Brillant
RAL 1021

Rouge Feu Brillant
RAL 3000

Rouge brun Brillant
RAL 3011

Bleu gentiane Brillant
RAL 5010

Vert sapin Brillant
RAL 6009

Vert réséda Brillant
RAL 6011

Gris anthracite Brillant
RAL 7016

Gris Clair Brillant
RAL 7035

Brun chocolat Brillant
RAL 8017

Blanc gris Brillant
RAL 9002

Aluminium blanc Brillant
RAL 9006

Noir foncé Brillant
RAL 9005

Grey Aluminium Brillant
RAL 9007

Blanc Pur Brillant
RAL 9010

Gris anthracite PVDF
RAL 7016

Brun gris PVDF
RAL 8019

Blanc gris PVDF
RAL 9002

Noir foncé PVDF
RAL 9005

Aluminium blanc PVDF
RAL 9006

Umbra Gris Super Brillant
RAL 7022

Metigla Groen Super Brillant
RAL

Rouge brun Super Mat
RAL 3005

Rouge oxyde Super Mat
RAL 3009

Vert oxyde Super Mat
RAL 6020

Gris anthracite Super Mat
RAL 7016

Brun cuivré Super Mat
RAL 8004

Brun chocolat Super Mat
RAL 8017

Brun gris Super Mat
RAL 8019

Noir foncé Super Mat
RAL 9005

Gris anthracite Pur Nova
RAL 7016

Brun chocolat Pur Nova
RAL 8017

Brun gris Pur Nova
RAL 8019

Noir foncé Pur Nova
RAL 9005

Gris anthracite Pur Mat
RAL 7016

Brun chocolat Pur Brillant
RAL 8017

Noir foncé Pur Brillant
RAL 9005

Bois naturel
RAL
The raw material used by Metigla in the production process is hot galvanized steel (1), with a zinc protection of at least 275 g/m² (2).
The zinc coating is protected through multilayer technology with a passivated coating (3), primary protective coating (4) and paint layer (5).
The top protective layer (5) is available in following versions: Polyester (25 μm gloss or 35 μm Super Mat), PVDF (polyvinylidene fluoride) of 25 μm or PUR NOVA (mat polyurethane) of 55 μm.
On the bottom side, the paint coating is 10 μm Polyester or Acrylic (6).


Eaves closure

Valley

Verge trim

Inner verge trim

Wall ridge

Semi-hip ridge
Please fill in the form below and we will contact you as soon as possible.